EM78P154N is an 8-bit microprocessor designed and developed with low-power, high-speed CMOS technology. It is quipped with 1K x 13-bits Electrical One Time Programmable Read Only Memory (OTP-ROM). It provides three PROTECTION bits to prevent user's code in the OTP memory from being intruded. 8 OPTION bits are also available to meet user's requirements.
With its OTP-ROM feature, the EM78P154N is able to offer a convenient way of developing and verifying user's programs. Moreover, user can take advantage of ELAN Writer to easily program his development code.
Features
- Operating voltage range:
* 2.1V ~ 5.5V at 0°C ~ 70°C
* 2.3V ~ 5.5V at 40°C ~ 85°C
- Operating frequency range (base on 2 clocks ):
* Crystal mode: DC ~ 20MHz at 5.0V, DC ~ 8MHz at 3.0V, DC ~ 4MHz at 2.1V
* ERC mode: DC ~ 4MHz at 5.0 ~ 2.1V
* IRC mode: 4 choices of frequencies available; I.e., 8M, 4M, 1M, & 455KHz
- IRC mode:
* All these four main frequencies can be trimmed by programming with four calibrated bits in the ICE159N Simulator.
OTP is auto trimmed by DWTR.
* Temperature, Voltage, and Process changes will influence the frequency drift
* Frequency deviation is only ±4.5% after auto trimming (based on Vdd=5V,Ta=25°C)
- Fast set-up time only requires about 2ms in high XTAL and 32CLKS in IRC mode from wake up to operating mode
- Low power consumption:
* Less then 2mA at 5V/4MHz
* Typically 20μA at 3V/32kHz
* Typically 1μA during Sleep mode
- 1K x 13 bits on chip ROM
- One security register to prevent intrusion of OTP memory codes
- One configuration register to accommodate user's requirements
- 48 x 8 bits on chip registers (SRAM, general purpose register)
- 2 bi-directional I/O ports
- 5 level stacks for subroutine nesting
- 8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
- Two clocks per instruction cycle
- Power down (SLEEP) mode
- Three available interruptions:
* TCC overflow interrupt
* Input-port status changed interrupt (wake up from Sleep mode)
* External interrupt
- Programmable free running watchdog timer
- 8 programmable pull-high pins
- 8 programmable pull-down pins
- 8 programmable open-drain pins
- 2 programmable R-option pins
- Package types:
* 18 pin DIP 300mil : EM78P154NP
* 18 pin SOP 300mil : EM78P154NM
* 20 pin SSOP 209mil : EM78P154NAS
* 20 pin SSOP 209mil : EM78P154NKM
* 99.9% single instruction cycle commands
- The transient point of system frequency between HXT and LXT is around 400KHz
DownLoad: EM78P154N PDF
|